Replacement: None. We are not carrying this product anymore. This page is for reference only.

Header board for the LPC2106 processor.

• MCU: 16/32 bit** LPC2106**
• 128K Bytes Program Flash, 64K Bytes RAM, RTC, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• DIL40 housing - Fits standard 600mil 40 pin sockets
• Two on board voltage regulators rated up to 800mA - 1.8V (Internal CPU) and 3.3V (General I/O)
• Single power supply of +5-9VDC required
• RESET, DBGSEL, RTCK Pull-up resistors
• 14.7456 MHz crystal divides down for easy communication setup
• Internal 4x PLL = 58.9824 MHz CPU clock
• External Clock Optional
• Power supply decoupling/filter capacitors
• Extension headers for P0.0-P0.31, DBGSEL, RST, RTCK, XIN, +3.3V_OUT, GND
• PCB: FR-4, 1.5 mm (0.062"), green solder mask, white silkscreen component print

**Software: **

• BLINK LED at P0.x - C source code (Rowley's CrossConnect), C source code (IAR EWARM) and compiled HEX code which can be programmed with Philips' Flash ISP utility
• SAKAMOTO YASUHIRO's mother board for LPC-H40 source codes for LCD display and lot of useful information for LPC2106

• Overall: 2.0x0.75" (51x20 mm)
• Space between the pin rows: 0.6" (15.24 mm)

• LPC-H2106 Datasheet, LPC-H2106 Schematic