Home | Product Categories | AVR | DEV-00036

ATMega128/103 Bare PCB

Description: A breakout board for the popular ATMega128 micro controllers. These are very nice PCBs with the AVR STK programming port, JTAG Debugging Port, and lines for power regulation. Please see schematic for specifics.

FR-4, 1.5 mm (0.062"), green solder mask, white silkscreen component print
Extension pin headers for each uC pin

Dimensions: 47x47 mm (1.85x1.85")
Documents: AVR-H128.pdf, Schematic, AVR-ICSP Connector, AVR-JTAG Connector

Supported Devices: ATMega128, ATMega128L

Pricing

images are CC BY-NC-SA 3.0

ASCII version

Comments 6 comments

mockd | about 2 years ago 1

Don’t suppose there is a chance you will be getting the microcontrollers to go with this board anytime soon?
scharkalvin | about 2 years ago 1

If you leave out R2 and re-label CON PIN 1 from *PEN to PG5 you can use this board for the atmega2561 and atmega1281 processors as well as the atmega128 and atmega64.
Shavi | about 2 years ago 1

Is it just me or are the JTAG pins missing?
- Member #146685 | about a year ago 1
  
  Yes, it seems like the picture is a prototype. Here is an image of the (green) version with the JTAG in place. http://www.shop.kristech.eu/product_info.php?cPath=22_38&products_id=55&language=EN
Chan | about a year ago 1

I got atmega128L 8ai 0608 microcontroller, wil this work for my microcontroller? guys this is my first project so please help me.
- Rigfix | about a year ago 1
  
  It should work fine.
  I have used a lot of these boards, and they are quite nice.