Replacement: None. There is no direct replacement for this product. This page is for reference only.

The WIZ1000 an enclosed version of their WIZ100SR - a gateway module that converts RS-232 protocol into TCP/IP. It enables remote gauging, managing and control of TCP/IP devices through an RS-232 serial interface. In other words, WIZ1000 is a protocol converter that transmits the data sent by serial equipment as TCP/IP data type and converts back the TCP/IP data received through the network into serial data to transmit back to the equipment.

The main components of the WIZ1000 are a WIZnet W5100 embedded ethernet controller chip and an 8051 complaint MCU. Also included on the board are DB9 and RJ45 connectors and a 5.5x2.1mm barrel jack. To power the board, a 5V power adapter is required.

• Fully enclosed RS-232 to TCP/IP gateway module
• WIZnet W5100 Hardwired TCP/IP Embedded Ethernet Controller
  • Supports: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet
  • 10BaseT/100BaseTX Ethernet PHY embedded
• GC89L591A0-MQ44I (fast 80C52 compatible) MCU
  • internal 62K Flash, 16K SRAM, 2K EEPROM
• Simple configuration over serial interface
• Supports password for security
• 10/100 Ethernet Interface and max 230kbps Serial Interface
• 5VDC input voltage
  • Center-positive 5.5x2.1mm barrel connector
• Under 180mA current consumption* PCB: 75x45 mm (2.95x1.77 inches)

• User's Manual
• Configuration Tool Program
• WIZnet Product Page