Personally I was looking for PICs
I use the PIC16F690 the most but its basically a beginning controller. It was the PIC used on the demo board that came with the programmer I bought.
I was looking on http://wiring.org.co/ and I couldn’t find where it lists the currently supported microcontrollers.
The description above says this will support a lot of them but which ones?
I was wondering if there is any way to set this up to transmit data on startup.
My project idea is a gps logger, but it looks like the gps has to be initialized first. I imagine it would be easy enough to edit the firmware but only the hex file is posted.
Thanks
News - Wiring 1.0 | about 7 months ago
Personally I was looking for PICs I use the PIC16F690 the most but its basically a beginning controller. It was the PIC used on the demo board that came with the programmer I bought.
News - Wiring 1.0 | about 7 months ago
I was looking on http://wiring.org.co/ and I couldn’t find where it lists the currently supported microcontrollers. The description above says this will support a lot of them but which ones?
Product DEV-09530 | about a year ago
I was wondering if there is any way to set this up to transmit data on startup.
My project idea is a gps logger, but it looks like the gps has to be initialized first. I imagine it would be easy enough to edit the firmware but only the hex file is posted.
Thanks
Product DEV-09601 | about 2 years ago
Any datasheets?
Tutorial - Reflow Toaster | about 2 years ago
I noticed this was posted in 2006, any progress?