Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
To make it even easier to get started, we've assembled this Qwiic Cable Kit with a variety of Qwiic cables from 50mm to 500mm…
This polarized I2C cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly i…
This panel mount USB-C extension cable enables you to more easily enclose a project that contains a USB-C port.
This is a time saving kit of 140 jumper wires - cut, stripped, and pre-bent for your prototyping pleasure.
These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to…
These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to…
These are 6" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board.…
An assortment of colored wires: you know it's a beautiful thing. Six different colors of solid core wire in a cardboard dispe…
This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together …
These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables…
1 Meter USB Type C to Type C cable USB 2.0 data transfer capabilities.
These 2-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and a…
This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together…
This SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes th…
The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and the I2C based Grove bo…
This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audi…
These are 26 AWG jumper wires terminated as male to male. Use these to jumper from any female header on any board, to any oth…
The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB…
These 0.3m cables have minor modifications that allow them to be be plugged into their ports regardless of orientation on the…
USB 2.0 type A to Micro-B 5-pin. This is a new, smaller connector for USB devices. Micro-B connectors are about half the heig…
Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the work…
Once you've hacked everything, why not go out in the garage and hack your car? This cable allows you to access the pins on yo…
This is a SparkFun exclusive! These are 26 AWG jumper wires terminated as male to female. Use these to jumper from any male o…
The SparkFun 4-in-1 Multi-USB Cable is a four-headed cable that will ensure that you're never stuck looking for a USB cable t…
This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a male header on the other.
This is a 5 pin JST-ZHR cable that's terminated on the end with breadboard breadboard compatible Dupont connectors.
This is a 10 meter (33 ft) long Male TNC to Male SMA cable with injection molded stress-relief boots.
An assortment of colored wires: you know it's a beautiful thing. Six different colors of stranded wire in a cardboard dispens…
This is a 150mm long, 10-conductor cable that's especially ideal for many JTAG applications.
These are 26 AWG jumper wires terminated as female to female. Use these to jumper from any male header on any board, to any o…
This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that's usual…
Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid female connector on either end. They have…
These 2m cables have minor modifications that allow them to be be plugged into their ports regardless of orientation on the U…
These 4-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and a…
This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE …
This is a 300mm (1 foot) Male TNC to Male SMA cable with injection molded stress-relief boots.
This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup…
This RP-SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes…
This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a female header on the other.
This is an interface cable for the [Bus Pirate](http://www.sparkfun.com/commerce/product_info.php?products_id=9544), designed…