Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
added to your cart!
This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB.…
The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS23…
The SparkFun USB-C Breakout supplies up to 3 times the power as previous USB board while breaking out each pin on the connect…
The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of your I2C communication bus.
Use this unique device to download data and control GPIB bus enabled oscilloscopes, logic analyzers, function generators, pow…
This simple board breaks out a female USB type A connector's VCC, GND, D- and D+ pins to a 0.1" pitch header. If you want to …
This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint.
This 2x20 "tall" header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to…
The SparkFun MicroMod Single Pair Ethernet Kit demonstrates 10BASE-T1L Two-Wire Ethernet protocol into the SparkFun MicroMod …
A row of headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.
The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic enabled board.
These headers are made to work with the Arduino Uno R3, Leonardo and new Arduino boards going forward. They are the perfect h…
This is the SparkFun RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your…
We have no idea what USB device you are hooking up to, but if you want to access the Micro-B port on something, you might wan…
The QwiicBus MidPoint works in tandem with the QwiicBus Endpoint to extend the range of your I2C bus and tap into it to drop …
With this USB-C breakout you will be able to incorporate a vertical USB-C connector into your projects without needing to sol…
These connectors are made from high-temp nylon with gold-plated spring pins or sockets molded in. The shape of this generic X…
The Qwiic MultiPort adds additional ports to boards that have only one Qwiic port on the I2C bus.
Everything you need for a fast and easy way to extend the range of your I2C communication bus.
Single row of 40-holes, female header. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use them exte…
This set of female stackable headers includes two 15-pin headers; the pins are spaced by 0.1".
TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands f…
This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm. We really like the solid locking feeling…
This 2x20 male header has the same number and spacing of pins as a Raspberry Pi but is best served when used in conjunction w…
These are a longer version of our [standard](http://www.sparkfun.com/commerce/product_info.php?products_id=116) break away he…
This simple board breaks out a micro-B USB connector's VCC, GND, ID, D- and D+ pins to a 0.1" pitch header. If you want to ad…
This 6-pin connector and plug set is great when you need to create a robust connection for signal or power. This product cons…
This DC power jack/connector is just like the other one that we carry except that it's terminated with breadboard-friendly pi…
A kit that includes all the male headers needed for your Raspberry Pi Pico board.
The SparkFun MicroMod Single Pair Ethernet Function Board introduces 10BASE-T1L Two-Wire Ethernet protocol into the SparkFun …
This is a 8-pin female header, with extra long legs -- great for stacking Arduino shields. Pins are spaced by 0.1".
This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with t…
Single row of 30-holes, female header with swiss round machined pins. These units have very high quality round pins to accept…
These are simple through-hole RJ45 sockets with PCB mounting posts. These 8-pin connectors are commonly used in conjunction w…
These headers are made to work with the SparkFun ESP32 Thing to connect to ESP32 Shield boards.
Screw Terminal 3.5mm pitch pins with slide-locking together to form any size you need. Rated up to 125V @ 6A, and can accept …
Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to crea…
This is a 2x23 pin female PTH header, with extra long legs which makes great for stacking. This piece is in the common config…
This is the SparkFun RJ11 Breakout, two simple breakout boards for the common 6-pin RJ11 connector. These little boards can e…
A row of right angle male headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custo…
These Clincher connectors from Amphenol FCI can be used to terminate Flat Flexible Cables (FFCs) to an easy-to-use standard h…
This kit has all the parts needed to connect to the Ethernet port on Teensy 4.1.
Integrate your MicroMod project into an Ethernet network including Power-over-Ethernet with the SparkFun MicroMod Ethernet Fu…
This is a black insulated binding post. These binding posts *do* accept banana plugs, and are a great way to connect single-w…
Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to …