Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
Jump to Subcategory:
The BT-560 antenna is a small, very light weight GNSS/GPS L1/L2 multiband antenna for GPS, GLONASS, Galileo, and BeiDou const…
The EM-506 GPS receiver from [USGlobalSat](http://www.usglobalsat.com) based on the spectacular SiRF StarIII chipset. This co…
The RockBLOCK External Patch Antenna is a magnetic mount antenna designed specifically to communicate efficiently with the Ir…
The SparkFun ZED-F9R GPS-RTK Breakout is a high precision, Automotive Dead Reckoning board with equally impressive configurat…
This 10m (33') SMA extension does a great job of connecting your receiver or radio to a distant antenna with as little RF los…
It carries the u-blox LEA-6S high-performance position engine.
**Replacement:** None. We are no longer carrying this EM-408 GPS Receiver in our catalog. This page is for reference only. T…
The smallest, most powerful, and most versatile GPS receiver we carry just got more powerful. The Venus638FLPx is the success…
**Description**This is a Arduino-compatible autopilot board designed by Chris Anderson and Jordi Muñoz of DIY Drones using t…
**Replacement:** None. We are, unfortunately, no longer carrying this GPS receiver in our catalog. This page is for reference…
The EM-406A GPS receiver from [USGlobalSat](http://www.usglobalsat.com) based on the spectacular SiRF StarIII chipset. This c…
Combine the u-Blox chipset with [Sarantel's](http://www.sarantel.com/) powerful SL1206 helical antenna and you get the impres…
The S1315F SMD IC is a small form factor 65-channel GPS module solution intended for a broad range of OEM products, where fas…
The GP-2106 is a really tiny GPS module. It's so small, in fact, that it's almost too small to use. Not only that, but the 1.…
The GeoHelix antenna from Sarentel is a one of those really odd looking antennas. Block ceramic antennas have good gain, but …
Our UAV Development Board is back! The UDB5 (UAV Development Board version 5) comes populated with a dsPIC33FJ256 CPU, and th…
This ZIF connector mates with the 6-conductor ribbon cable for the GP-2106 GPS module. Use it to roll your own GP-2106 carrie…
**Replacement:** None. We are no longer building this board but check out the rest of our [GPS category](https://www.sparkfun…
Horizontal surface mount connector for the EB-85A/FV-M8 GPS receiver.
The GP-635T is a slim GPS receiver with -161dBm tracking sensitivity and only 27 second cold start time. The slim design make…
That is a GPS chip antenna. Itty-bitty! And we were just as surprised when it picked up just as many satellites as the larger…
Surface mount vertical 5-pin 1.0mm pitch connector for connecting to the EM-408 interface cable.
This is the surface mount header that mates with the Lassen IQ. **Part #**: CLP-104-02-G-D [ www.samtec.com](http://www.samt…
**Replacement: **None. We're not selling these connectors anymore. This page is for reference only. This is the SMD connecto…
This is a Arduino-compatible autopilot board designed by Chris Anderson and Jordi Muñoz of DIY Drones using the new ATMega32…
**Replacement:**[GPS-11466](https://www.sparkfun.com/products/11466). This module has been updated to a u-Blox 6 chipset and …
**Replacement:**[GPS-11858](https://www.sparkfun.com/products/11858). We've released a new rev of this GPS module that fixes …
Communication cable, 1 foot in length, that connects with the EM408. The EM408 GPS modules come with a cable. Cable has two a…
**Replacement:** None. There is no direct replacement for this particular GPS module. This page is for reference only. This …
GNSS RTK Click is a compact add-on board used to enhance the precision of position data derived from satellite-based position…
**Replacement:** None. Unfortunately the supplier for these helical GPS Receiver is no longer in business so we can no longer…
Vertical 10 pin SMD connector for the GS406 GPS module.
**Replacement:** None. We're no longer building this board but check out our [GPS evaluation boards](https://www.sparkfun.com…
**Replacement:** None. There is no direct replacement for this item. This page is for reference only. The ML-7 is a truly co…
**Replacement:** None. We are no longer carrying this product. This page is for reference only. This board from DIYDrones fe…
**Description**: The LS20031 GPS receiver is a complete 10Hz GPS smart antenna receiver, that includes an embedded antenna an…
GNSS 2 Click carries Quectel’s L76 module and an SMA antenna connector.
**Replacement:** None. While we don't carry a direct replacement for this module, have a look at our other modules in the [GP…
**Replacement:** None. There is no direct replacement for the KinetaMap. It had a good run, but it's time to go away. We stop…
**Replacement:**[GPS-09980](http://www.sparkfun.com/commerce/product_info.php?products_id=9980). The v3 board comes with a ds…
**Replacement:** None. We are no longer selling this GPS module, but have a look at the rest of our [GPS](http://www.sparkfun…
The GPS Logger V2.4 is the next generation of GPS Loggers from Spark Fun Electronics. v2.4 logs NMEA 0183 sentences to a stan…
**Replacement:** None. We don't carry a direct replacement for this module but check out the rest of our [GPS category](https…
**Replacement:**[GPS-08975](http://www.sparkfun.com/products/8975). We are no longer carrying the SUP-500 due to poor quality…
**Replacement**: [GPS-10921](http://www.sparkfun.com/products/10921). The new version of this board is built with the Venus63…
**Replacement:**[GPS-09436](http://www.sparkfun.com/commerce/product_info.php?products_id=9436). This module has been discont…
**Replacement:**[GPS-10582](http://www.sparkfun.com/products/10582). The UDB4 is here! This page is for reference only. This…
This 6-conductor ribbon cable mates with the connector on the bottom of the GP-2106 GPS module.
