Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
The SparkFun GPS-RTK-SMA Kit comes with just what you need to get started using GPS Real Time Kinematics and the u-blox ZED-F…
The RTK Express Kit has everything you need to get centimeter level global positioning measurements using GNSS RTK.
The RTK Surveyor Kit has everything you need to get centimeter level global positioning measurements using GNSS RTK.
The MyoWare® 2.0 Muscle Sensor Development Kit is an Arduino-compatible, EMG sensor kit that provides you with every board f…
The RTK Express Plus Kit has everything you need to get centimeter level global positioning measurements using GNSS RTK.
The SparkFun GPS-RTK Dead Reckoning Kit provides you with what you need to start with GPS Real Time Kinematics and the u-blox…
To make it even easier to get started, we've assembled this Qwiic Cable Kit with a variety of Qwiic cables from 50mm to 500mm…
This panel mount USB-C extension cable enables you to more easily enclose a project that contains a USB-C port.
This polarized I2C cable insulation is made from silicon making it more flexible than our original Qwiic cable particularly i…
This is a time saving kit of 140 jumper wires - cut, stripped, and pre-bent for your prototyping pleasure.
The SparkFun GPS-RTK Dead Reckoning Kit gives you just what you need to get started with GPS Real Time Kinematics and the u-b…
This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together …
An assortment of colored wires: you know it's a beautiful thing. Six different colors of solid core wire in a cardboard dispe…
These 2-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and a…
Embark on a Journey of Geographical Discovery with the Limited Edition SparkFun DataLogger IoT GPS Kit.
The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and the I2C based Grove bo…
1 Meter USB Type C to Type C cable USB 2.0 data transfer capabilities.
This SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes th…
This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together…
These 0.3m cables have minor modifications that allow them to be be plugged into their ports regardless of orientation on the…
Get ready to monitor your environment with this limited-edition kit that includes everything you need to get started with the…
An assortment of colored wires: you know it's a beautiful thing. Six different colors of stranded wire in a cardboard dispens…
This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a male header on the other.
The Air Quality Monitoring version of the OpenLog Data Collector Kit with Machinechat allows you to display your data with th…
USB 2.0 type A to Micro-B 5-pin. This is a new, smaller connector for USB devices. Micro-B connectors are about half the heig…
The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB…
The SparkFun GNSS-RTK Accessory Kit gives you just what you need to start using your RTK board for your project.
The SparkFun 4-in-1 Multi-USB Cable is a four-headed cable that will ensure that you're never stuck looking for a USB cable t…
Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid female connector on either end. They have…
This is a 150mm long, 10-conductor cable that's especially ideal for many JTAG applications.
The Environmental Monitoring version of the OpenLog Data Collector Kit with Machinechat allows you to display your data with …
This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to con…
This is a 5 pin JST-ZHR cable that's terminated on the end with breadboard breadboard compatible Dupont connectors.
Embark on a Journey of RFID Exploration with the SparkFun DataLogger IoT RFID Kit.
The SparkFun Qwiic Kit for Raspberry Pi includes a shield with headers, three Qwiic-enabled breakout boards, and four cables …
These 2m cables have minor modifications that allow them to be be plugged into their ports regardless of orientation on the U…
These 4-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and a…
This is an interface cable for the [Bus Pirate](http://www.sparkfun.com/commerce/product_info.php?products_id=9544), designed…
This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a female header on the other.
This RP-SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes…
This is a SparkFun exclusive! These are 12" long, 26 AWG jumper wires terminated as male to female. Use these to jumper from …