Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
The NVIDIA® Jetson AGX Orin™ Developer Kit makes it easy to get started with Jetson Orin.
Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microc…
At the heart of the Experiential Robotics Platform (XRP) lies the powerful yet easy-to-use XRP Controller Board, the brains o…
The 915MHz SiK Telemetry Radio V3 is a lightweight and inexpensive open source radio platform that can allow for ranges of 30…
Introducing the SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pin-out of this b…
The Raspberry Pi Pico W is a low-cost, high-performance microcontroller board with flexible digital interfaces featuring the …
We have no idea what USB device you are hooking up to, but if you want to access the Micro-B port on something, you might wan…
USB 2.0 type A to Micro-B 5-pin. This is a new, smaller connector for USB devices. Micro-B connectors are about half the heig…
The Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces featuring the ne…
The SparkFun 4-in-1 Multi-USB Cable is a four-headed cable that will ensure that you're never stuck looking for a USB cable t…
ESP32-DevKitC Dual Antenna is a low-footprint and entry-level development board that is part of the ESP32 series. This board …
This panel mount USB micro-B extension cable enables you to more easily enclose a project that contains a USB micro-B port.
This panel mount USB-B (female) to micro-B (male) cable enables you to more easily enclose a project that contains a USB micr…
This simple board breaks out a micro-B USB connector's VCC, GND, ID, D- and D+ pins to a 0.1" pitch header. If you want to ad…
W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W…
These 2m cables have minor, yet genius modifications that allow both ends (the A & Micro-B) to be plugged into their ports re…
These 0.8m cables have minor, yet genius modifications that allow both ends to be plugged into their ports regardless of thei…
The SparkFun Qwiic Micro is molded to fit our standard 1" x 1" Qwiic board size which makes it our smallest SAMD21 micro-cont…
Pi Zero Micro-B to USB A is a really useful USB specification! It allows some small devices that would normally be unable to …
This is a pretty straight-forward HAT for bringing simple cluster computing to the Raspberry Pi A+ and B+ lines.
The LilyPad Simple Power is a simple e-textile board with a 500mA charge rate that lets you connect and charge a lipo battery…
The Raspberry Pi Pico H is a low-cost, high-performance microcontroller board with flexible digital interfaces featuring the …
This adaptor allows you to power your RPi 4 with a previous usb-micro B power supply.
WVR features 8GB of memory and an advanced Web GUI where users upload audio and manage configuration and firmware.
These 0.3m cables have minor, yet genius modifications that allow both ends to be plugged into their ports regardless of thei…
A basic FTDI kit with a basic breakout board for the SparkFun FT231X Breakout board, a reversible USB-A to Micro-B cable, and…
It's tiny, it's handy, and it can give your normal USB-equipped device a micro-B connector! With the USB to Micro-B Adapter y…
A black USB A to Micro B cable for use with the micro:bit.
WizFi360-EVB-Pico is based on Raspberry Pi RP2040 and adds WiFi connectivity using WizFi360.
A green USB A to Micro B cable for use with the micro:bit.
This is a USB 3.0 type A to Micro-B 9-pin cable.
The SparkFun Qwiic PIR Starter Kit (170µA) comes with just the basics of what you need to get started working with passive i…
The SparkFun Qwiic PIR Starter Kit (1µA) comes with just the basics of what you need to get started working with passive inf…