Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
The SparkFun ESP32-C6 Pocket Dev Board is built around a RISC-V single-core processor with 4 MB flash memory in a 1"x1" Qwiic…
Inside this kit you will find two XBee Modules, one XBee Explorer, one Xbee Shield and a set of Arduino R3 headers to solder …
This is an XBee module with a RP-SMA connector. You also get a built in microcontroller so it can be programmed using MicroPy…
This is an XBee module with a PCB Antenna. You also get a built in microcontroller so it can be programmed using MicroPython …
Raytac’s MDBT50Q is a BT 5.2 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF52840 SoC solution.
The XBee3 Thing Plus is an ultra-capable and easy way for getting into wireless device development.
This is an XBee module with a U.FL connector. You also get a built in microcontroller so it can be programmed using MicroPyth…
This small form-factor antenna offers a 2.4GHz frequency range.
The SparkFun Blues Wireless MicroMod Starter Kit provides every part needed to get you connected and start prototyping with t…
This is a similar XBee Pro module with a u.Fl connector. You also get a built in microcontroller so it can be programmed usin…
Operating on the 2.4GHz or 5.8GHz band, it works great for WiFi, Bluetooth or ZigBee.
This is an XBee Pro package with a PCB Antenna. You also get a built in microcontroller so it can be programmed using MicroPy…
This is an XBee Pro module with an RP-SMA connector. You also get a built in microcontroller so it can be programmed using Mi…
The BMD-34 series are advanced, highly flexible, ultralow-power multiprotocol modules that enable concurrent Bluetooth 5, Thr…