Comments: AT42QT1010 Capacitive Touch Breakout Hookup Guide

Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #855124 / about 7 years ago / 1

    Hi,

    The sensor is working great in my little circuit. However, when I try to use an external electrode connected to the PAD pin, the signal goes HIGH and stays HIGH regardless of the electrode being touched or not.

    Do you have any idea why?

    • What are you using as your external electrode? Make sure that nothing is touching the PCB pad when you are testing.

  • Parizival / about 10 years ago / 1

    Could I just as easily mount this to a panel with some hot glue?

    • Hot glue should work. I haven't personally tested it, but it should be able to sense touches through the hot glue.


If you've found an issue with this tutorial content, please send us your feedback!