Experiment Guide for RedBot with Shadow Chassis
bri_huang
Shawn Hymel
SFUptownMaker
Resources and Going Further
Get moving!
Hopefully, this guide has given you enough information to get started with the RedBot!
Once you've mastered the art of line following robots, try you hand at other types of robots.
- You could use a robotic claw and a pan/tilt bracket to design a robot with an arm to fetch items for you.
- You could create your own remote control using various SparkFun parts.
- And, you can always give your robot a new look with different types of robot chassis.
Resources
GitHub repositories:
- RedBot
- RedBot with Optical Encodery
- RedBot Accelerometer
- RedBot Line_Sensor
- RedBot Whisker Bumper
- RedBot Buzzer
Beyond the Tutorial
Here are some guides and projects to get you going with other ideas:
MMA8452Q Accelerometer Breakout Hookup Guide
How to get started using the MMA8452Q 3-axis accelerometer -- a solid, digital, easy-to-use acceleration sensor.
Alternative Arduino Interfaces
We admit the Arduino IDE isn't for everyone. Here are some other options for programming your Arduino boards, including web interfaces and graphical programming languages.
Need some inspiration? Check out our other robots found in our robotics section.
Continuous Rotation Servo Trigger Hookup Guide
How to use the SparkFun Continuous Rotation Servo Trigger with continuous rotation servos, without any programming!
Qwiic Joystick Hookup Guide
Looking for an easy way to implement a joystick to your next Arduino or Raspberry Pi project? This hookup guide will walk you through using the Qwiic Joystick with the Arduino IDE on a RedBoard Qwiic and in Python on a Raspberry Pi.
Wireless Remote Control with micro:bit
In this tutorial, we will utilize the MakeCode radio blocks to have the one micro:bit transmit a signal to a receiving micro:bit on the same channel. Eventually, we will control a micro:bot wirelessly using parts from the arcade:kit!
Or try checking out these cool robots from AVC.