FLIR Lepton Hookup Guide
Contributors:
Nick Poole
Nick Poole 
Resources and Going Further
Now that you're successfully retrieving LWIR images from the Lepton module, you can dig into the example code and apply it to your own project!
For more information, check out the resources below:
- Breakout Board Schematic (PDF)
- Datasheet
- Raspberry Pi: Raspbian OS Download
- Mike's Electric Stuff: Reverse-Engineering the FLiR Lepton(R)
- Pure Engineering: Project Page
- Lepton Module GitHub Repo -- Library, Example Code, & Design Files. The example in this tutorial uses the code from this repository.
- PyLepton (Python)
- GetThermal Viewer ( Linux & macOS )
- FLIR’s Lepton SDKs
- 32-bit (ZIP)
- 64-bit (ZIP)
- Discussion Forum
- GroupGets: Product Page
- SparkFun Product Showcase
Thermography has hundreds of applications. Spend some time just playing with the camera to see where you might find uses for it. Try piping the frames captured from your Lepton module into some computer vision software like SimpleCV! We'd love to see what you do with the FLiR Dev Kit so be sure to leave a comment and tell us all about it!
Need some inspiration for your next project? Check out some of these related tutorials:
SD Cards and Writing Images
How to upload images to an SD card for Raspberry Pi, PCDuino, or your favorite SBC.
PiRetrocade Assembly Guide
Build your very own retro gaming controller with a Raspberry Pi using the SparkFun PiRetrocade Kit!
Using the PSoC 6 Pioneer Board with the Pioneer IoT Add-on Shield
Cypress's PSoC 6 Pioneer Board is a development tool for the powerful PSoC 6 processor. In this tutorial, we'll show you how to use the PSoC 6 Pioneer Board along with the SparkFun/Digi-Key Pioneer IoT Add-on Shield to send data to a Raspberry Pi via BLE or WiFi.
RP2040 Thing Plus Hookup Guide
Want to take a stab at advancing your programming skills? Check out the Thing Plus - RP2040, with the first microcontroller from the Raspberry Pi Foundation. This guide will get you started working with the RP2040 and programming in MicroPython and C/C++.
MLX90614 IR Thermometer Hookup Guide
How to use the MLX90614 or our SparkFun IR Thermometer Evaluation Board to take temperatures remotely, over short distances.
Qwiic GRID-Eye Infrared Array (AMG88xx) Hookup Guide
The Panasonic GRID-Eye (AMG88xx) 8x8 thermopile array serves as a functional low-resolution infrared camera. This means you have a square array of 64 pixels each capable of independent temperature detection. It’s like having thermal camera (or Predator’s vision), just in really low resolution.
Or check out the FLiRPiCam project which includes a 3D printed enclosure files: