Interactive 3D Printed LED Diamond Prop

Pages
Contributors: bboyho
Favorited Favorite 5

Enclosure

To secure the electronics, a cardboard enclosure was made to house the electronics. I considered using just the diamond holder but the space was limited. Grab a cardboard box and cut a hole in the shape of the holder's bottom.

Cut Enclosure in the shape of the bottom of the diamond holder

Placed the electronics in the enclosure and secure using electrical tape. This would also be a good time to tape the diamond holder down.

Circuit secured to bottom of cardboard box with electrical tape

Cut an additional hole for the wires leading to the copper tape electrode.

Hole for copper tape's wire