Light-Up Plush

Contributors: Gella

Introduction

For this project, we'll try individually controlling the LEDs in an e-textile circuit. We’ll explore two ways of controlling the flow of current to an LED using a button and switch while we craft a creative plush creature.

Design and build time: 2 - 3 hours

This is Project 3 from the LilyPad Sewable Electronics Kit, take a look at the other projects in the kit:

• Project 1: Glowing Pin
• Project 2: Illuminated Mask
• Project 4: Night-Light Pennant

Suggested Reading

If this is your first sewable electronics project, we recommend you read our LilyPad Basics tutorial.