Logomatic Hookup Guide

Pages
Contributors: Toni_K
Favorited Favorite 1

Resources and Going Further

Now that you've successfully gotten your Logomatic logging away, you can start tweaking the system to your exact preferences. The firmware is open-source and available here, or you can check GitHub repository for the most current version. Feel free to tweak or change the firmware. The unit's code can be changed via the USB bootloader. You can also reprogram the unit via and LPC programmer. For more information about reprogramming the Logomatic via the bootloader, check out the LPC2148 USB Bootloader tutorial.

Warning! Unfortunately, the archived programming environment (WinARM-20060606.zip) that was originally used to compile the bootloader is now unavailable to download from the tutorial. The alternative programming environments out there that was listed in the tutorial may be able to work but it has not been tested. Also, you may be able to find a work around by checking the SparkFun Community Forums.

For more information, check out the resources below:

Check out these additional resources for more information and other project ideas.


If you have any feedback, please visit the comments or contact our technical support team at TechSupport@sparkfun.com.