MicroMod STM32 Processor Hookup Guide

Pages
Contributors: Alex the Giant, Ell C
Favorited Favorite 0

Hardware Assembly

If you have not already, make sure to check out the Getting Started with MicroMod: Hardware Hookup for information on inserting your Processor Board into your Carrier Board.

Getting Started with MicroMod

October 21, 2020

Dive into the world of MicroMod - a compact interface to connect a microcontroller to various peripherals via the M.2 Connector!

After inserting the MicroMod STM32 processor board into a carrier board, your setup may look like the following:

alt text

Go ahead and secure the Processor Board by gently pressing it down and tightening the screw (not too much though).

Gently tightening the screw on the micromod carrier board to secure the processor