Qwiic Flex Glove Controller Hookup Guide
Contributors:
Englandsaurus
Resources and Going Further
Now that you've successfully got your Qwiic Flex Glove Controller up and running, it's time to incorporate it into your own project!
For more information, check out the resources below:
- Schematic (PDF)
- Eagle Files (ZIP)
- ADS1015 Datasheet (PDF)
- Qwiic Landing Page
- GitHub Repos
- SparkFun Product Showcase: Qwiic Flex Glove Controller
Need even more inspiration for your next project? Check out some of these related tutorials:
Qwiic Keypad Hookup Guide
If you are tired of taking up GPIO pins, wiring a bunch of pull up resistors, and using firmware that scans the keys taking up valuable processing time... check out the new Qwiic Keypad.
SparkFun Humidity Sensor Breakout - SHTC3 (Qwiic) Hookup Guide
A Hookup Guide to get started using the SHTC3 breakout.
Qwiic Digital Indoor Thermometer
Qwiic-ly build a digital indoor thermometer to measure the ambient temperature of the room and display it using an OLED on an I2C bus!
SparkFun MicroMod Input and Display Carrier Board Hookup Guide
A short Hookup Guide to get started with the SparkFun MicroMod Input and Display Carrier Board
Or check out this blog post for inspiration.