Comments: Qwiic Single Relay Hookup Guide

Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #454028 / about 3 years ago / 1

    I can't seem to get either the Quad Relay (https://www.sparkfun.com/products/16566) or the Single Relay (https://www.sparkfun.com/products/15093) to function using the Example sketches Example_2_Quad_Relay_Basics and Example_1_Single_Relay_Basics. I am using an Artemis Redboard Nano connected to the relay with a Qwiic connector. I power the quad relay with 10V from a lab power supply. Single relay doesn't need external power for the relay coils, as I understand it. Both power LEDs lights up, and the Serial print statements work, but no relay actuation (either audible, or measuring continuity with a multimeter).
    I tested them one at a time, not daisy chained.

  • fourstix / about 5 years ago / 1

    There is a CircuitPython library now available for the Qwiic Single Relay and the Raspberry Pi. The source code, examples, installation information and documentation are available on GitHub.

    https://github.com/fourstix/Sparkfun_CircuitPython_QwiicRelay


If you've found an issue with this tutorial content, please send us your feedback!