Qwiic Transparent OLED HUD Hookup Guide
Contributors:
Englandsaurus
Englandsaurus 
Hardware Assembly
The Transparent OLED HUD requires quite a little bit of RAM (Around 5500 bytes) so you'll need to connect to your I2C pins directly to devices without Qwiic Shields. Connect yellow to SCL, blue to SDA, red to 3.3V and black to ground using the Qwiic jumper adapter cable to the respective pins of your board. In this case, we connected the board to an Arduino Mega 2560's I2C pins.
Transparent OLED HUD Attached to Arduino Mega