RedBot Assembly Guide

This Tutorial is Retired!

This tutorial covers concepts or technologies that are no longer current. It's still here for you to read and enjoy, but may not be as useful as our newest tutorials.

Pages
Contributors: SFUptownMaker, HelloTechie
Favorited Favorite 0

RedBot Mainboard

You are now ready to add the RedBot Mainboard to the four L10 metal standoffs on the top chassis piece.

Locate the following:

  • 4x M3*6 Screws

Place the RedBot Mainboard on the top of the L10 metal standoffs. When looking down on your RedBot, the battery pack will be on the top end, the RedBot Mainboard's power jack will be on the right side, and the USB will be on the left. Using four M3*6 screws, screw down the RedBot Mainboard to the L10 metal standoffs.

Adding RedBot mainboard