Favorited
Favorite
3
Introduction
Note: This shield has been updated to v1.1. The only difference in the revision is a single jumper to isolate the Vcc power from 5V. Just in case users accidentally connect 5V to the ISP pins (the Teensy is a 3.3V board).
The Teensy Arduino Shield Adapter is a useful tool for upgrading existing projects to a more powerful controller. If you have an Arduino shield you'd love to use, but prefer working with the Teensy, then this product is just what you need!
Required Materials
To follow along with this tutorial, we recommend you have access to the following materials.
As this adapter was originally designed for the Teensy 3.1, we recommend using either the Teensy 3.1 or 3.2. However, th footprint is compatible with the Teensy LC (not all of the features available on the adapter are compatible with the LC... see Teensy Compatibility section).
Retired
DEV-12646
The Teensy 3.1 is a breadboard-friendly development board with loads of features in a, well, teensy package.
35
Retired
Retired
DEV-13305
The Teensy LC is a 32 bit microcontroller board that provides you with an uncomplicated option to get started with Teensy wit…
17
Retired
Out of stock
DEV-13736
The Teensy 3.2 is a breadboard-friendly development board with loads of features in a, well, teensy package.
68
In addition to the Teensy, you will need a micro-USB cable (examples below):
In stock
CAB-13244
This is a USB 2.0 type A to Micro-B 5-pin black cable. You know, the mini-B connector that usually comes with cell phones, Ca…
3
In stock
CAB-15428
These 0.8m cables have minor, yet genius modifications that allow both ends to be plugged into their ports regardless of thei…
1
In stock
CAB-15429
These 0.3m cables have minor, yet genius modifications that allow both ends to be plugged into their ports regardless of thei…
Retired
CAB-14742
Is your laptop covered in stickers that hide the dents? Do you put your equipment through its paces? The SparkFun 1 meter Rug…
Retired
To assemble the adapter shield, you will need some soldering equipment (examples below):
Only 11 left!
TOL-10243
We don't want to hype this solder TOO much, but this could possibly be the best solder in the world. There, we've said it. Th…
7
Out of stock
SWG-11046
With these SparkFun Safety Glasses you'll have a pair of lightweight, economical, and stylish lenses to protect your precious…
3
Retired
TOL-10447
While our small diagonal cutters are great for hobby use, sometimes you need something with a little more bite. These electro…
6
Retired
Retired
TOL-14228
The WLC100 from Weller is a versatile 5 watt to 40 watt soldering station that is perfect for hobbyists, DIYers and students.…
2
Retired
34 available
TOL-08775
Solder wick, coffee, and paper towels keep SparkFun running. You can steal someone's diagonal cutters for a minute, but you'd…
4
Retired
TOL-14681
This assortment of tools is great for those of you who need a solid set of tools to start your workbench on the right foot!
Retired
Suggested Reading
If you aren't familiar with the following concepts, please review them before beginning to work with the Teensy Arduino Shield Adapter.
Toni_K 
