Wireless Remote Weather Station with micro:bit

Pages
Contributors: bboyho
Favorited Favorite 6

Resources and Going Further

Now that you've successfully got your micro:bits communicating, it's time to incorporate it into your own project! If you have not already, try making an enclosure or your weather station. (The tutorial uses a different programming language but it is a good illustration of how to place your sensors in an enclosure.)

Need more inspiration? Check out our other sensors and weather stations used in other languages found in our weather section.

ML8511 UV Sensor Hookup Guide

Get up and running quickly with this simple to use UV sensor.

Blynk Board Project Guide

A series of Blynk projects you can set up on the Blynk Board without ever re-programming it.

SparkFun gator:UV Hookup Guide

The gator:UV is an I2C based UV sensor. This tutorial will get you started using the gator:UV with the micro:bit platform.

Artemis Global Tracker Hookup Guide

The SparkFun Artemis Global Tracker combines the Artemis processor with an Iridium 9603N satellite transceiver, ZOE-M8Q GNSS transceiver, and MS8607 PHT sensor. With a clear view of the sky, this board allows you to send and receive short data messages from anywhere in the world including remote locations far beyond the reach of WiFi and GSM networks. Follow this guide to get started with the Artemis Global Tracker.