The RTK Reference Station was released yesterday, but we will talk a little more about it today, along with two new BMI270 6DoF IMU boards!
Last week, we released four new boards featuring the BMA400 from Bosch as well as the LPS28DFW from STMicroelectronics. Today, we are going to take a closer look at each of these chip sets!
The BMA400 and LPS28DFW receive both Standard-sized and Micro-sized Qwiic board versions!
Three new Machinechat Kits are now available from SparkFun Electronics! Also, be sure to pick up your limited edition Constellation Kit while supplies last!
This week the BMP581 Pressure Sensor and ISM330DHCX 6DoF IMU get the Qwiic treatment!
The BMP384 Pressure Sensor is the newest board to join the Qwiic ecosystem but don't forget about our new RP2040 options, too!
A new BME688 Sensor is now available along with a Raspberry Pi Pico Display Kit and the new Oak-D LITE!
Tags
Recent Blog Comments
I think I just overwrite the DataLogger IoT firmware was doing firmware update and accidently hit Arduino script file, instead of cool term…
Thanks for the great description! I hadn't even been aware of the existance of NNSS, though in the mid 1980s, I'd looked at LORAN-C for a…
Thanks for the L band sharing !
Over the years, I've been pretty vocal about wanting on-board RTCs, with at least the possibility of connecting something like a coin…
Not only does VBAT supply the RTC, but there’s also battery-backed RAM onboard too! With the amount of space available on the Thing Plus…
Interesting... it sort of covers one of my "hot buttons", that is having an RTC. In looking at the schematic, I noticed that the "BAT"…
But Social Engineer's LOVE him. Good job catching so many of the buttons social manipulators use, but I nearly thought Sparkfun was off…
There's a disclaimer at the very end, hopefully that's enough to keep people from attempting. Glad you liked it!
Update: I followed all of the steps listed in this guide. My computer is now virus-free! The fan keeps coming on and the hard drive is…
You need to reflash the firmware - see: https://github.com/sparkfun/SparkFun_DataLogger/issues/3 Once you flash using that command, you can…