- Home
- Product Categories
- Headers
- 2mm 10pin XBee Header
This is a 10-pin header with 2mm pitch that mates with our XBee socket. It can be used for making 'dummy XBees' or anything else you want!
**Note: **This item is sold singly, not in pairs.
2mm 10pin XBee Header Product Help and Resources
Connector Basics
January 18, 2013
Connectors are a major source of confusion for people just beginning electronics. The number of different options, terms, and names of connectors can make selecting one, or finding the one you need, daunting. This article will help you get a jump on the world of connectors.
Core Skill: Soldering
This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.
Skill Level: Noob - Some basic soldering is required, but it is limited to a just a few pins, basic through-hole soldering, and couple (if any) polarized components. A basic soldering iron is all you should need.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
5 out of 5
Based on 1 ratings:
This header is not breadboard compatible. It is the same spacing as the xbee module pins.
You are right...does anybody know how I can mate a Wifly with a breadboard without soldering anything ?
You will want to use something like IC hooks. That's really going to be the only way to this up to a breadboard without soldering anything.