- Home
- Product Categories
- USB
- USB Micro-B Cable - 6 Foot
USB 2.0 type A to Micro-B 5-pin. This is a new, smaller connector for USB devices. Micro-B connectors are about half the height of mini USB. Micro-B is found on newer hand held devices like cell phones and portable media devices. Works great with the Google Nexus One. Cable color and shape may vary slightly from image as our stock rotates.
If you're still trying to wrap your head around the world of USB cables, why not check out our USB Buying Guide?
- 6 glorious feet
USB Micro-B Cable - 6 Foot Product Help and Resources
Qwiic Digital Indoor Thermometer
July 15, 2020
Qwiic-ly build a digital indoor thermometer to measure the ambient temperature of the room and display it using an OLED on an I2C bus!
Connector Basics
January 18, 2013
Connectors are a major source of confusion for people just beginning electronics. The number of different options, terms, and names of connectors can make selecting one, or finding the one you need, daunting. This article will help you get a jump on the world of connectors.
SparkFun Inventor's Kit Experiment Guide - v4.1
August 8, 2019
The SparkFun Inventor's Kit (SIK) Experiment Guide contains all of the information needed to build all five projects, encompassing 16 circuits, in the latest version of the kit, v4.1.2 and v4.1.
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
4.3 out of 5
Based on 15 ratings:
1 of 1 found this helpful:
Good cables
I used to buy my USB microB cables from Amazon.com when I had free shipping with Amazon Prime but now that I don't, I order these and I think they are comparable in quality and I've never had an issue with them breaking or not fitting the Arduino Leonardo, which is what I typically use them for. Great price for a great product, highly recommend.
1 of 1 found this helpful:
Very Good
Works well, just as expected.
1 of 1 found this helpful:
It works great!
Using to power/flash my particle photon. Works great and the 6' is a good length!
1 of 1 found this helpful:
Could not ask for better!
The cable connected my laptop to my Arduino Leonardo and never missed a bit. Program transfer first time I tried it.
4 of 5 found this helpful:
Review of USB microB Cable - 6 Foot - not so great
Greetings Bought 4 of these cables, two have failed within a week of going into service. Both had issues with the micro b end. One went intermittent, no sign visible damage, But seemed loose when mated and had lots of wiggle. The other physically broke loose internally but did not come out of the connector backshell. One cable used on an Asus T-100 transformer book. The next on a galaxy s4. No I don't try to abuse them and yes I'm a sixty something yo klutz. But I typically get a couple of years out of a cable that is used daily. My plan is to lop off the affecting appendage and replace it with new end. Going to try to do more thorough research on the replacement part.
It is workin fine.
Works great
The right cable for the logo matic ver 2 from spatkfun. Many thanks to spatkfuns great customer support. I buy items based on quality of your support. Cheers!
Great cable
What can I say, it is a great cable and was just what I needed! 😋
Works great
Its been working great.
Well-Built Cable
Connects to and operates my RPI Pico just fine - making progress rapidly!
Works like it should
Seems to be a quality product!
Are you planning on selling a SF branded one, like the Mini USB one?
Anyone use these with Raspberry Pi? Any of the fit issues?
Does this cable have a wire connected to the 5th pin on the micro USB plug side?
How thick is the cable? Could someone throw a caliper on them.
"4.15mm In diameter. It is a little squishy but generally pretty solid." -Sparkfun
Is there any plans for a red SparkFun MicroB 3.0 cable?
I ordered one to have an extra to use with teensy 3.1 Turns out it's the only one that stays plugged into my worn out phone. So the other one is with the teensy. To me it's a good, rugged USB cord, much better fit in any device I've used it on than the super cheepos that come with cell phones. I think I'll just order one every time I place a SFE order. My $0.02
I hope this will work well for Teensy 3.1.
I bought this cable with the LiPo Charger Basic (PRT-10217). I think that it's very difficult to plug and unplug the cable into the microUSB connector. I'm always afraid to snap off the connector from the breakout board.
Yep, I bought this to go with the old-school LiPo Charger/Booster (PRT-10300). Gave the device prototype to a user and the PRT-10300 connector was snapped off within 48 hrs. Too tight a fit.
Does anyone have a suggestion for a cable that will be a little less snug?
I have to report the same thing. The micro USB end on this is very tight when plugging into my phone and other devices. To the point where it actually doesn't work with some of my devices such as my Sansa Clip 2gig.