The INV135 is a simple and easy to use electroluminescent inverter from ELastoLite® that will allow you to drive 8in² EL panels and below. The INV135 charges at 3.7V with a 1100mAh current thanks to the mini USB rechargeable Li-Poly battery enclosed in the inverter. All you need to do to start using the INV135 is simply plug in any 4-pin 1mm spaced connector or one of the ELastoLite® over-molded connectors, press a button, and get glowing!

ELastoLite® is a waterproof electroluminescent lamp line that allows you to apply light to any article of clothing or project. Thanks to a 3-dimensional, elastomeric, membranous polymer thick film, this EL line can be applied to almost any surface with no loss to flexibility and movement.

Note: Make sure you check out the Hookup Guide below for ELastoLite® tips and how to choose the right inverter. Bigger isn't always better; you should match your inverter to the panels you're driving.

Note: This item may take longer to process due to battery installed in the equipment and therefore does not qualify for same-day shipping policy. Sorry for any inconvenience this may cause.

• 1x USB-A to USB Mini B Cable

• Hookup Guide
• Inverter Instructions
• Elastolite Assembly Video
• Captain America Shield
• Product Video