- Home
- GTE Knob - Medium
GTE Knob - Medium
Do you need that extra push over the cliff? The Medium sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm wide shaft thanks to a brass insert with a set screw.
We know that most of you are playing at ten, but with the GTE Knob you can go... one louder.
Note: It goes to eleven.
- 28.9 x 18.3mm
GTE Knob - Medium Product Help and Resources
Core Skill: DIY
Whether it's for assembling a kit, hacking an enclosure, or creating your own parts; the DIY skill is all about knowing how to use tools and the techniques associated with them.
Skill Level: Noob - Basic assembly is required. You may need to provide your own basic tools like a screwdriver, hammer or scissors. Power tools or custom parts are not required. Instructions will be included and easy to follow. Sewing may be required, but only with included patterns.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
No reviews yet.
It's one louder, innit?
I sincerely hope that I can pull the brass insert out and get this to fit on a 1/4" shaft, because if you guys made GTE knobs that aren't readily installed on my Marhsall JCM 800 I'm going to cry.
On all the pots I have, these either go 1-10 or 2-11. Not exactly what I expected.
http://xkcd.com/670/
Now at least my cost won't include a custom knob! :)
Awesome!