- Home
- Product Categories
- Headers
- Break Away Headers - 40-pin Male (Long Centered, PTH, 0.1")
Break Away Headers - 40-pin Male (Long Centered, PTH, 0.1")
This is a row of 40 break away headers spaced 0.1" apart with long pins on both sides. This header is especially useful when you need to connect a PCB to a solderless breadboard. Each header can be broken apart to your preference to fit custom PCBs or general custom headers.
Break Away Headers - 40-pin Male (Long Centered, PTH, 0.1") Product Help and Resources
Core Skill: Soldering
This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.
Skill Level: Noob - Some basic soldering is required, but it is limited to a just a few pins, basic through-hole soldering, and couple (if any) polarized components. A basic soldering iron is all you should need.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
5 out of 5
Based on 1 ratings:
1 of 1 found this helpful:
Awesome and easy to cut with wire cutters/dykes
When using wire cutters I was able to easily cut the amount off that I needed and without any loss. The pins can be moved back and forth with some effort, (they won't just fall out or move easily on their own), and the length is very good for securely putting into a breadboard and having enough to also secure a jumper cable or other female connector on top.
Can you slide the plastic on these like PRT-10158, to make one side longer for wire wrapping?
Seems like a bargain if you need bulk. Only 2 mm shorter than PRT-10158, and you need to manually shift the plastic along the pins. Or is there some other difference that I am missing?
Very useful for my never used "extension" servo cable product 8738