Spade Connector Wire - 3ft, Female (2 Pack)

These simple 24AWG wires are terminated with a female insulated spade connector at one end and a braided wire lead at the other. Each wire is 3 feet long and is capable of supporting a high voltage of 300VDC. Each order comes in a pack of two!

We use these cables almost exclusively on our Spectacle Button Board, but that doesn't mean you can't find a different use for them!

Documentation:

  • 3ft (0.9m) length

Spade Connector Wire - 3ft, Female (2 Pack) Product Help and Resources

Qwiic Speaker Amp (TPA2016D2) Hookup Guide

September 29, 2022

The SparkFun Qwiic Speaker Amp includes the Texas Instruments TPA2016D2 stereo, filter-free class-D audio power amplifier. This tutorial will help you get started and configure the amplifer settings using an Arduino microcontroller.

Using Quick Disconnect with Microswitch Terminals

Connect to microswitch terminals using these female spade connectors to wires as shown below:

Female Spade Connector Wires Used with microswitch terminals


Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

Customer Reviews

No reviews yet.