- Home
- Product Categories
- Dings and Dents
- Balun Ember Transformer (Strip of 5)
Balun Ember Transformer (Strip of 5)
This is a simple strip of five signal-conditioning Balun Ember Transformers from Wurth Elektronik that allows you to convert an unbalanced signal in a transmission line to a balanced one, or vice versa. Each of these ICs possesses a frequency range of 2400MHz to 2500MHz with an impedance of 50 ohms unbalanced and 100 ohms balanced.
These specific transformers were once used in our ATmega128RFA1 Development Board but, sadly, are no longer needed. We have made them available at a drastically reduced price for anyone who could possibly use one (or five) of these handy little ICs.
Note: Since this product belongs to our “Ding & Dent” category, once we are out of stock, we will not carry it again. Get them while you can!
Balun Ember Transformer (Strip of 5) Product Help and Resources
Core Skill: Soldering
This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.
Skill Level: Competent - You will encounter surface mount components and basic SMD soldering techniques are required.
See all skill levels
Core Skill: Electrical Prototyping
If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.
Skill Level: Rookie - You may be required to know a bit more about the component, such as orientation, or how to hook it up, in addition to power requirements. You will need to understand polarized components.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
No reviews yet.