WiFi 2 Click features the HLK-M30 WiFi module with a built-in TCP/IP protocol stack. The click is designed to run on a 3.3V power supply; it communicates with the target MCU over an UART interface and the following mikroBUS™ pins: AN, RST.
TCP/IP client of server
WiFi 2 Click can be set up both as a TCP/IP client or server. You can configure it with either a static or dynamic IP address. Use the mikroBUS™ AN line (DEF on this Click) to reset WiFi 2 to default factory settings if needed.
Security and network protocols
WiFi 2 Click supports standard security authentication systems (WEP64/WEP128/ TKIP/ AES, WEP/WPA-PSK/WPA2-PSK); as well as multiple network protocols (TCP/UDP/ DHCP/DNS). All these features make WiFi 2 Click ideal for home automation applications, remote controls, telemetry etc.
PBC antenna
The Click features a PCB trace antenna, designed for the 2400–2483.5 MHz frequency band.
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
No reviews yet.