Polarized Connectors - Housing (3-Pin)

Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed.

This is for the female housing. Be sure to order the mating header and crimp pins!

Pins have standard 0.1" spacing.

Polarized Connectors - Housing (3-Pin) Product Help and Resources

Working with Wire

February 8, 2013

How to strip, crimp, and work with wire.

Building Large LED Installations

July 16, 2015

Learn what it takes to build large LED installations from planning to power requirements to execution.

1 of 1 found this helpful:

3-pin Female Housing Only

PRT-08096 only has the 3-pin Female Housing. The picture is confusing. Try looking at this picture [ https://drive.google.com/open?id=0B0jwgLkjMWzDS3Fpa05qSmNXc0E ].

You will still need to order the crimp pins [ https://www.sparkfun.com/products/8100 ] and 3-pin male polarized connector [ https://www.sparkfun.com/products/8232 ] . Make sure that you are using crimp tool [ https://www.sparkfun.com/products/13193 ].


Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #847091 / about 8 years ago / 1

    I thought there would be more than one - but it's juts one tiny connector :/ Ahh well, ebay will have more...

  • Member #565448 / about 10 years ago / 4

    Suggestion - could you make separate pictures of each part, it's really confusing trying to work out which part is the housing, or the crimp pin or the connector when you show the same picture each time.

  • VPD / about 15 years ago / 1

    Could these connectors be used with the photo interupter board?

Customer Reviews

No reviews yet.