- Home
- Product Categories
- Color
- Color 24-Bit LCD 4.3" PSP Connector
Color 24-Bit LCD 4.3" PSP Connector
This is the ZIF connector for the PSP LCD. 0.5mm pitch means you'll have to be a bit experienced with soldering.
Note: The ribbon contacts are on the bottom of the connector. This means the PSP LCD will be facing down initially when you insert the ribbon into the connector and then fold the LCD back over the connector saving PCB space.
Color 24-Bit LCD 4.3" PSP Connector Product Help and Resources
Core Skill: Soldering
This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.
Skill Level: Competent - You will encounter surface mount components and basic SMD soldering techniques are required.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
No reviews yet.
Can we look forward to getting breakout boards for connectors like these? I'd like to see a variety someday in the connectors category.
I would also like to see a breakout board for this connector.
I would like a breakout board as well!
me 2!!!
Indeed, I'll buy when a breakout board shows up!
I'm would buy this with the PSP LCD & touch screen if this had a breakout.
http://mouser.com/Search/ProductDetail.aspx?R=NHD-FFC40virtualkey66010000virtualkey763-NHD-FFC40
Breakout board from Mouser, recommended by sparkfun tech support.
http://mouser.com/Search/ProductDetail.aspx?R=NHD-FFC40virtualkey66010000virtualkey763-NHD-FFC40
that is a link to this connector with breakoutboard, on mouser
please stock this sparkfun, mouser is charging too much
or any sort of smd breakout board with at least 40 pins on one side
thanks
Is this the connector on the rapsberry pi?
Never fear the pitch >:)
Eagle part, plz!
Can I reiterate what everyone else is saying ? Where's the breakout board. I want one of these displays so bad but w/o a breakout board for this connector I have no way to use it. Where's the love sparkfun ?
also theres a 4 pin power connector that is also tricky to work with, to power the backlight. I'm not sure if the touchscreen connector would work the same, maybe that could be sold with/near this and a breakout board?
I think that the link above isn't up to date.
This datasheet is up to date and has the recommended footprint.
http://www.4uconnector.com/online/object/4udrawing/06660.pdf
Is there a footprint for this part somewhere? I'm lazy...