Shopping Cart 0 items
log in register
Today's Deals Forum Desktop Site
All Categories
Featured
Brands
Development
Sensors
Tools
Miscellaneous
Components
E-Textiles
Robotics
Wireless & IoT
Audio

Creative Commons images are CC BY 2.0

Favorited Favorite 2
Wish List

Mating Connector Housing for Dust Sensor

This is a 6-pin 1.5mm pitch connector which mates directly with the connector on the Sharp GP2Y1010AU0F optical dust sensor. This is a ZH series JST connector. You will need six matching crimp pins in conjunction with this part, they can be found here.

We also carry a mating, PCB mounting, connector for this housing.

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • ETX-Lofts / about 13 years ago / 2

    There is a IDC style connector that I have found to be much easier to use and is compatible with the JST housing. Digikey part 455-2293-ND. Without the $800+ crimper you are forced to use place the wires one at a time with a flathead screwdriver but it is not too bad.

  • Member #519394 / about 10 years ago / 1

    On ebay they sell a sensor with connector and cables as one. Wish I knew that before I ordered the sensor and spent the last hour trying to solder something the size of an ants toenail!

    http://www.ebay.com/itm/SHARP-GP2Y1010AU0F-Compact-Optical-Dust-Sensor-AIR-QUALITY-/180793270697?pt=LH_DefaultDomain_0&hash=item2a181e61a9

  • caposc / about 11 years ago / 1

    Was able to modify some Molex 0.1" with a rotary tool grinder. They are a bit fragile, but they fit and work well. Here is a link to the Molex datasheet, Datasheet\

    You have to cut off the last segment of the spring part. Still, Should have bought the crimp pins they sell here...

  • Member #373627 / about 12 years ago / 1

    ebay has premade connector cables

  • trialex / about 13 years ago / 1

    These are reasonable hard to crimp and make the cable yourself, I'd love to be able to buy a pre-made 6"-or-so cable!

    • ElGus / about 13 years ago / 1

      I second that!
      I got the crimping tool and it does make life easier than crimping with needle nose pliers but it still takes about 10 to 20 (at least for me) crimping attempts until one can reliably make a cable without braking the wires inside ... Now I'm almost getting 2 reliable connectors every minute :-)

  • von Corax / about 14 years ago / 1

    The URL for the datasheet on this item has changed - it's now at http://www.jst-mfg.com/product/pdf/eng/eZH.pdf

    • jimblom / about 14 years ago / 1

      Thanks for the heads up. The link up top is fixed now.

Customer Reviews

3 out of 5

Based on 1 ratings:

Currently viewing all customer reviews.

2 of 2 found this helpful:

Worked well but such a pain

by verified purchaser

This and the pins worked well for connecting the dust sensor but made for a long day soldering little wires in little pins and pushing them in.