Shopping Cart 0 items
log in register
Today's Deals Forum Desktop Site
All Categories
Featured
Brands
Development
Sensors
Tools
Miscellaneous
Components
E-Textiles
Robotics
Wireless & IoT
Audio

Creative Commons images are CC BY 2.0

Favorited Favorite 7
Wish List

LED - RGB Clear Common Anode (25 pack)

We all know that you can never get too many LEDs. Don't worry, we've got you covered. This is a pack of 25 LEDs all conveniently packaged in a nice reusable ESD safe bag. Make that next project shine!

  • 25 RGB LEDs
  • Standard size - T1 3/4 5mm
  • 800/4000/900 mcd brightness
  • 2.0V/3.2V/3.2V forward drop
  • Max current 20mA
  • Common Anode

Tags

LED - RGB Clear Common Anode (25 pack) Product Help and Resources

Non-Addressable RGB LED Strip Hookup Guide

February 19, 2020
Add color to your projects with non-addressable LED strips! These are perfect if you want to control and power the entire strip with one color for your props, car, fish tank, room, wall, or perhaps under cabinet lighting in your home.
Favorited Favorite 2

Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

3 Electrical Prototyping

Skill Level: Competent - You will be required to reference a datasheet or schematic to know how to use a component. Your knowledge of a datasheet will only require basic features like power requirements, pinouts, or communications type. Also, you may need a power supply that?s greater than 12V or more than 1A worth of current.
See all skill levels

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Eliav / about 11 years ago / 1

    Are these the same LEDs as the single version (https://www.sparkfun.com/products/10820)? I'm assuming so but the luminosity is completely different. These also seem pretty bright (looking at the info above) compared to other RGB LED's I've seen. Can anyone confirm these are really that bright?

  • Member #112655 / about 12 years ago / 1

    I tried driving at the specified voltages in series with the specified resistor values and I get nothing. If I crank up the juice to around 5-6 volts I get the green to work but can't get the other colors at all. What am I doing wrong?

    Thanks.

    • Wiseguy84 / about 12 years ago / 1

      Hi There, The little sheet packed with the leds is wrong. The sheet shows the negative attached to pin 2 and positive(via resistor) to the others. These LED's are common anode (i.e. common positive) therefore you need to connect the positive to pin 2 and the resistors & negative to the other pins.

      • Member #313535 / about 12 years ago / 1

        I can confirm this - I just tested this and the sheet is wrong! The long wire is the anode and goes to positive. 5V and 3.3V both work.

      • danielpl / about 12 years ago / 1

        The longest pin is the annode!

  • Member #112655 / about 12 years ago / 1

    I tried driving at the specified voltages in series with the specified resistor values and I get nothing. If I crank up the juice to around 5-6 volts I get the green to work but can't get the other colors at all. What am I doing wrong?

    Thanks.

  • Wiseguy84 / about 12 years ago / 1

    Does anyone know if the 20mA Imax is per colour or total combined?

Customer Reviews

No reviews yet.