- Home
- Product Categories
- DC/Gearmotor
- Micro Gearmotor - 110 RPM (6-12V)
Micro Gearmotor - 110 RPM (6-12V)
These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 250:1 and operate up to 12 volts and have a stall torque of 60 oz-in. and a max speed of 110 RPM. Each micro gearmotor sports a 3mm D-shaft.
Note: The micro gearmotor enclosures are sold separately, you can find them here.
- Voltage: 6 - 12 Volts
- Gear Ratio: 250:1
- Stall Torque: 32/60 oz-in. (6/12V)
- Speed: 55/110 RPM (6/12V)
- No Load Current: 30/70 mA (6/12V)
- Stall Current: 360/1600 mA (6/12V)
- DC Reversible* Motor Size: 26 x 12 x 10mm
- Shaft Size: 3mm Diameter x 10mm Length
- Weight: 17g
Micro Gearmotor - 110 RPM (6-12V) Product Help and Resources
Wireless Joystick Hookup Guide
January 5, 2017
A hookup guide for the SparkFun Wireless Joystick Kit.
Core Skill: Robotics
This skill concerns mechanical and robotics knowledge. You may need to know how mechanical parts interact, how motors work, or how to use motor drivers and controllers.
Skill Level: Rookie - You will be required to know some basics about motors, basic motor drivers and how simple robotic motion can be accomplished.
See all skill levels
Core Skill: Electrical Prototyping
If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.
Skill Level: Noob - You don't need to reference a datasheet, but you will need to know basic power requirements.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
No reviews yet.
-------------------- Tech Support Tips/Troubleshooting/Common Issues --------------------
Extending the Shaft of the Microgear Motor
If you are looking for a way to extend the microgear motor's shaft to add an encoder, feel free to use the Shaft Coupler - 1/4" to 3mm [ https://www.sparkfun.com/products/12412 ]. You would just need to find a shaft length that is suitable for your project. Here's an example from ServoCity using a shaft coupler with a micro gearmotor => [ https://www.servocity.com/media/catalog/product/cache/1/image/438x280/602f0fa2c1f0d1ba5e241f914e856ff9/c/o/coupler_on_gearmotor_with_shafting.jpg ].