Replacement: None. We are no longer carrying this development board but have a look at the rest of our development tools category! This page is for reference only.

Web enabled board for the LPC2124 processor. Includes FTDI USB<->RS232 Interface connection!

• MCU: LPC2124 16/32 bit ARM7TDMI with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• CS8900 Ethernet interface
• Two general purpose buttons
• Potentiometer connected to analog input 0
• Dallas iButton interface
• 24LC515 EEPROM for external web storage
• Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• Two on board voltage regulators 1.8V and 3.3V with up to 800mA current
• Single power supply: >+5VDC required
• Three LAN status LEDs, three general purpose status LEDs
• Power supply filtering capacitor
• USB to RS232 interface
• RESET circuit with external control of Philips ISP utility via USB/RS232
• RESET button
• DBG jumper for JTAG enable
• BSL jumper for bootloader enable
• JRST jumper for enable/disable external RESET control by RS232
• 14.7456 MHz crystal
• Extension header for all uC ports
• PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print

****Software:****

• uIP freeware TCP-IP stack port by Rowley Associates for LPC-E212x boards
• FreeRTOS now is able to run the uIP as task
• **UART demo code **
• button read and status LED

• 3.15x3.55" (80x90mm)

• LPC-E2124 Schematic
• Ethernet LED Matrix tutorial by Owen Osborn