This product has shipping restrictions, so it might have limited shipping options or cannot be shipped to the following countries:
Replacement: None. It's time for this product to step aside and make room in the catalog for even more cool stuff. This page is for reference only.
A 50-pin breakout board for the GM862. No components, no headers, just a 50-pin molex connector and two rows of 0.1" footprints with pin labels. Take absolute control over the GM862!
Don't forget to set the module to use the North American frequencies: AT#BND=1
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
No reviews yet.
Beware of the dimensional drawing. Where it says 1650 on the vertical axis it is really 2100 mil.
Does anyone know if this will work with the Telit UC864-G?
This breakout board works with the gm862 with gps??
This board is very useful.
BUT DO NOT FORGET TO REMOVE THE STICKER THAT IS INSIDE THE CONNECTOR. LOL.
Note that the TX on this board connects to your serial's TX and not RX.
I' ve also made an Eagle library for the evaluation board, if anybody still want it please email me at: admin [at] stilix [dot] net
mindThomas: Great board!
I've made an Eagle Libary of this board, to use this evaluation board, connected to my own PCB via two female-headers!
How can I go about getting a copy of your Eagle Library for this board?
Great board!
I've made an Eagle Libary of this board, to use this evaluation board, connected to my own PCB via two female-headers!
mindThomas,
Can you send along the Eagle Library?
I'd like to take a look at the spaces you used. thanks!