- Home
- Product Categories
- Oscillators
- Crystal 8MHz
Crystal 8MHz
Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package.
Crystal 8MHz Product Help and Resources
Core Skill: Electrical Prototyping
If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.
Skill Level: Competent - You will be required to reference a datasheet or schematic to know how to use a component. Your knowledge of a datasheet will only require basic features like power requirements, pinouts, or communications type. Also, you may need a power supply that?s greater than 12V or more than 1A worth of current.
See all skill levels
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
No reviews yet.
Does anybody know how to implement these two-legged crystals in practical applications? I am coming up dry on any information on this. I have an IC that needs a clock, and I have this crystal. How do I get it to oscillate? My IC has one clock input terminal.
Can i use higher capacitance value than 20pF? I.e. 22pF as shown under "Related products"?
2pf is within the tolerance of the parts anyway. A 20pf could easily be a 22pf in fact. If this were a recipe it would call for a "smidgen of capacitance". Either way would work.