Replacement: None. We are not carrying this product anymore. This page is for reference only.

Prototype board for MSP430F1121 microcontrollers with power supply circuit, crystal oscillator circuit, and JTAG port.

**Included Processor: ** MSP430F1121: Soldered to the back of the board.

• FR-4, 1.5 mm (0.062"), green solder mask, white silkscreen component print
• JTAG Programming Header
• JTAG Power_In and Power_Out jumpers
• TEST pin pull-down
• RST/NMI pin pull-up
• LED connected to P1.0 via jumper
• Voltage regulator +3.3V/1A and filtering capacitors
• 32.768 kHz crystal oscillator
• Extension slot on every uC pin
• Grid 100 mils
• Four mounting holes
• GND bus
• Vcc bus

**Software: **msp430-p1121.asm test software with LED blink

• 100x80 mm (3.9x3.15")

• msp430-p1121-e.pdf, Schematic, MSP JTAG connector