Replacement: None. We are no longer stocking these programmers. This page is for reference only.
The PIC-PG3B is a powerful programmer based on David Tait's parallel port design. To operate it needs an external power supply of 12-15VAC or 16-18VDC. It supports all 8/18/28 and 40 pin PIC microcontrollers which allow serial programming. This programmer comes with an ICSP connector and cable can be used to program the P28B, P40B, and other prototype boards.
**Tutorial: **How to setup the PG3B.
Software Option #1:ICPROG by Bonny Gijzen. It's best software for serial* and* parallelport programmers we've seen - and it's free!
**Supported Devices: Major Devices: 12F679, 12F675, 16F819, 16F628, 16F84A, 16F873, 16F873A, 16F876, 16F876A, 16F877, 16F877A
This list is only the popular Microchip Devices! Download the latest version of IC-Prog for a complete list (it's huge).
Software Option #2:SHAREWARE software by Bojan Dobaj
Supported Devices: PIC12C508, PIC12C508A, PIC12C509, PIC12C509A, PIC12CE518, PIC12CE519, PIC12C671, PIC12C672, PIC12CE673, PIC12CE674, PIC16C505, PIC16C554, PIC16C556, PIC16C558, PIC16C61, PIC16C62, PIC16C62A, PIC16C62B, PIC16C63, PIC16C64, PIC16C64A, PIC16C64B, PIC16C65, PIC16C65A, PIC16C65B, PIC16C66, PIC16C67, PIC16C620, PIC16C620A, PIC16C621, PIC16C621A, PIC16C662, PIC16C662A, PIC16CE623, PIC16CE624, PIC16CE625, PIC16C662, PIC16C71, PIC16C72, PIC16C73, PIC16C74, PIC16C74A, PIC16C74B, PIC16C76, PIC16C77, PIC16C710, PIC16C711, PIC16C715, PIC16C84, PIC16F83, PIC16F84, PIC16F84A, PIC16F873, PIC16F874, PIC16F876, PIC16F877, PIC16C923, PIC16C924
Software Option #3:FREE software by Nigel Goodwin
**Updated! Software Supported Devices: **PIC16C84, PIC16F83, PIC16F84, PIC16F84A, PIC16F873, PIC16F874, PIC16F876, PIC16F877, PIC16F627, PIC16F628
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
No reviews yet.
I use a RadioShack #273-1631 power supply. It is sold as a replacement power supply for AT&T answering machines.
It outputs 9-13VAC switchable and has the correct barrel connector for this PIC programmer.