Shopping Cart 0 items
log in register
Today's Deals Forum Desktop Site
All Categories
Featured
Brands
Development
Sensors
Tools
Miscellaneous
Components
E-Textiles
Robotics
Wireless & IoT
Audio

Creative Commons images are CC BY 2.0

Favorited Favorite 2
Wish List

PICAXE Serial Programming Cable

Used for programming, this cable allows the PICAXE to be connected to any computer with a serial port. The folks at PICAXE have developed a very convenient way to develop with PIC microcontrollers! By placing a small bootloader onto the IC, the user can download new PICAXE code onto the IC over a serial connection. This cable has a standard DB9 connection on one end, and a 3.5mm audio connection on the other. Works with all PICAXE development boards.

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #478419 / about 10 years ago / 1

    Question, Will this cable work for the Intel Galileo as well?

  • wrongnumber / about 12 years ago / 1

    lets say I was looking to build a setup which would let me talk to an arduino board using my laptop in the following manner

    laptop->wifi router(running a custom server software)->[serial connector]->arduino->{DO SOMETHING}

    and have located this guide here http://www.myopenrouter.com/article/10811/Hacking-Your-NETGEAR-WGR614L-How-To-Install-A-Serial-Port/ which helps interface serial on a 3.5mm audio jack, so will this cable work?... i.e give me a access to arduino using serial?....

    Thanks PS: help needed for project, if someone interested!

  • Spooky_Dad / about 13 years ago / 1

    So, if I am looking at the product specs for both the AXE027 and the PGM-09260, there is a conversion that is taking place from the USB protocol to the RS232 protocol, right? Could you suggest the software drivers that would do this without hardware? When I ran the voltage test in the program editor, I got -0.47 volts when the LED was off and nearly 5 volts when the LED was on, it was just looking for the AXE027.

  • Spooky_Dad / about 13 years ago / 1

    I have a USB to Serial cable that I am using with the PGM-08313. Is this a suitable replacement for the AXE027?

  • CrazyCreator / about 13 years ago / 1

    If my computer did not have a serial port, but I used a USB-to-serial adapter, would this still work?

Customer Reviews

No reviews yet.