Replacement: None. There is no direct replacement for this board. This page is for reference only.

This is a great starter board which allow you to explore all capabilities of PIC18F4550 and the Microchip's USB firmware. The software examples include: USB HID mouse which will allow you to move the mouse cursor with the four buttons on the board, USB Mass storage device on SD-MMC card simple adds USB disk to your computer, and a simple USB to RS232 converter. All these are available from Microchip, ready to be customized and embedded in your next application. The debugging is In-Circuit through ICSP connector.

• ICSP/ICD connector for programming with PIC-MCP, PIC-MCP-USB, PIC-PG1,PIC-PG2, PIC-PG3 or PIC-PG4 and programming and debuggine with PIC-ICD2, PIC-ICD2-POCKET, PIC-ICD2-TINY
• USB 2.0 type B connector
• RS232 connector
• SD-MMC connector
• Audio In, Audio Out connectors
• Status LEDs
• Trimmer potentiometer
• Four buttons
• PIC18F4550-I/P included
• Quartz crystal 20Mhz
• Reset button
• Power jack with diode bridge can be powered with AC or DC power supply
• 5V regulator
• Four mounting holes 3.3 mm (0.13")
• FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print
• 104x76 mm (4.1x3")

• PIC-USB-STK schematic
• PIC ICSP connector
• USB bootloader (C source and HEX)
• HID Mouse demo (C source and HEX)
• Mass Storage device (C source and HEX)
• USB RS232 converter (C source and HEX)
• PIC-USB-STK demo code (C source and HEX)