Shopping Cart 0 items
log in register
Today's Deals Forum Desktop Site
All Categories
Featured
Brands
Development
Sensors
Tools
Miscellaneous
Components
E-Textiles
Robotics
Wireless & IoT
Audio

Creative Commons images are CC BY 2.0

Favorited Favorite 1
Wish List

ProtoBoard - Square 1" Double Sided

This is a very simple but extremely handy, 1" square, double sided perf board. Standard 0.1" spacing with a 4-40 (3mm) hole for mounting.

** Package of 2**

ProtoBoard - Square 1" Double Sided Product Help and Resources

Core Skill: Soldering

This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.

1 Soldering

Skill Level: Noob - Some basic soldering is required, but it is limited to a just a few pins, basic through-hole soldering, and couple (if any) polarized components. A basic soldering iron is all you should need.
See all skill levels

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Earlz / about 14 years ago / 5

    You can clearly see where the boards were once together. Why not leave them together in case we need something wider and let us break it ourselves?

  • Jonathan Bruneau / about 12 years ago / 1

    It would be great if Sparkfun offered traces on this protoboard like the single sided version: https://www.sparkfun.com/products/8808

    I would jump on that like a bird on a junebug.

  • planetarian / about 12 years ago / 1

    Aw, I was hoping it'd be an interesting color like the dark blue one in the pictures. Mine are boring PCB green too =(

  • Midknight5000 / about 12 years ago / 1

    warning, these don't always come in blue. Mine are green.

  • shotthefly / about 12 years ago / 1

    Does anybody know how the via connects the holes? (Like which holes are connected?)

    What does the big hole on the top center do?

    • Far_Seeker / about 12 years ago / 2

      The big hole is a mounting hole. Also, the term "via" in the context of electronics means plated hole used to connect two different layers on a PCB (as opposed to Latin where it can mean "way" or "road"). This being a double sided board, the vias only connect the pads on one end of a given hole to another. There doesn't appear to be traces connecting pads on either side of the board. However, the single sided version of this board does have some pads connected by traces (basically in lines three pads long, except around the mounting hole).

  • arctimer / about 13 years ago / 1

    Are the holes plated through?

    • SFUptownMaker / about 13 years ago / 1

      Yes, the holes are plated through, including the mounting hole.

  • IllogicGate / about 13 years ago / 1

    Are the top and bottom solder points connected with a via?

  • baum / about 13 years ago / 1

    More?

Customer Reviews

5 out of 5

Based on 1 ratings:

Currently viewing all customer reviews.

Great Product!

by verified purchaser

High quality, and does exactly what it's supposed to.