Single Axis MEMS Gyroscope - LISY300AL

Replacement:COM-09401. This part has been discontinued, however we now carry the LY530AL low-power single-axis gyro, which is a suitable replacement in most applications. This page is for reference only.

This is a low power single axis gyro from ST Microelectronics with a 300 degree per second maximum range. Options include integrated low pass filters and an embedded power down feature. Gives a angular rate analog voltage through one pin. Comes in a LGA-28 pin package.

  • 2.7 to 3.6VDC supply
  • +/-300 degree/ second output
  • Embedded power-down feature
  • Analog rate out
  • Integrated low pass filters
  • Embedded self test
  • High shock survivability

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Mikro / about 15 years ago / 2

    Any chance you'd consider making a breakout board mounting three of these gyros to measure X, Y and Z axes?

  • voiceafx / about 15 years ago / 1

    ST has a dual-axis (pitch and roll) gyro that is similarly priced. Cheap gyros = cool new toys!

  • How about a 6DOF breakoutboard with IDG300, LISY300AL and MMA7260Q. That would be great for the UAV fans!
    Better still to embed all those on a Logomatic with a free I2C port!!

  • JayK / about 15 years ago / 1

    Does anyone have an eagle footprint for this?

  • Any time-frame on when a breakout board version will be available?

    • This gyro works very well. Breakout board should be posted mid to late December 2008.

    • Fredjikrang / about 15 years ago / 1

      Agreed! I would love to have a breakout board of this chip.

  • EINENGEL / about 15 years ago / 1

    Anyone used this gyro? Price is little bit surprising.

Customer Reviews

No reviews yet.