Switching Power Supply - 24V 500mA

Replacement: None. We do not have a direct replacement for this supply. This page is for reference only.

This is a nicely enclosed unit that takes an AC supply between 85V and 265V and steps it down to 24VDC at 500mA. Contains 5 screw terminal, two for AC input, two for DC output and one for a common ground.

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • JRiggles / about 15 years ago / 2

    (possibly stupid question) I'd like to run this as a dual polarity supply: is it safe to assume that this will give me +/- 24v at the DC output(s)? Or will I get +24v total and I'll have to split-rail it for +/- 12v DC?

  • jcraig111 / about 13 years ago / 1

    OK for all of you that are still wondering about the "+ /- " question. You will get +24 between the - and + out puts. Measuring either one to the common ground will give you nothing. The ground is for the AC in. I got one of these and tested it so this is what I found. Hope that is helpful.

  • John_CA / about 14 years ago / 1

    I would like to echo the "stupid question". Is "FG" 12 or 24 volts from the +/- pins? i.e. Do you get 48 volts from +V to -V or do you get 24V?

    • WillWD / about 13 years ago / 1

      Hi, It takes it from AC +/- and makes it 24VDC +/- with the FG as a ground, eg. house... I think.. does this help?

  • tomcuga / about 15 years ago / 1

    what is trimmer used for?

  • GETSEMAN / about 15 years ago / 1

    Any one has an idea if this 24V 500mA PS suitable to drive directly a string 6 or 7 power leds (e.g. Lumiled star LXHLMWId 3.42V 350mA)?.

  • Rubi / about 15 years ago / 1

    Hi
    I was lucky and could snatch one of these, but they were sold out on the first day. I hope you will restock them.
    Cheers
    Rubi

Customer Reviews

No reviews yet.