- Home
- SMT Spacer/Nut
SMT Spacer/Nut
Replacement: None. We do not have a direct replacement for this product. This page is for reference only.
This is a carbon steel surface mount right angle spacer and nut from Penn Engineering. The beauty of this nut is that it can be reflow soldered onto a PCB! Once mounted, you screw directly into the nut in the PCB. Reduces the amount of loose hardware on your PCB. 0.062" length and 2-56 thread.
Comments
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
Customer Reviews
No reviews yet.
I use these on every board I design, but for me a #2-56 screw won't cut it. Any chance of expanding your stock on these fasteners? Their margin is pretty good!
Description says it's a right angle spacer and nut. It doesn't appear to be right angle from the photo.
Datsheet link gives a 404 not found
Fixed!
Needs a profile view, IMO, as it's ahrd to make out the shape of this item from the view provided.
Agreed - we'll try to get an action shot in there as well so you see how it mounts.