Dual Axis Gyro - LPY530AL - 300°/s

Replacement: None. We no longer carry this IC, but check out our sensors category for more gyros. This page is for reference only.

This is a low-power dual axis (pitch and yaw) gyro with a ±300°/s maximum range. Options include integrated low pass filters and embedded power down and self-test features. Both x and z outputs are analog, and a 4x amplified output signal is also available for both axes. Comes in an LGA-16 package.

  • 2.7 to 3.6VDC supply
  • Dual axis pitch and yaw sensing
  • ±300°/s output
  • Low power consumption
  • Wide operating temperature range (-40°C to +85°C)
  • High stability overtemperature
  • Embedded power-down feature
  • Analog angular-rate outputs
  • 4x amplified analog outputs
  • Integrated low pass filters
  • Embedded self test
  • High shock survivability

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • sudh / about 13 years ago / 1

    hello all..
    Iam using LPY5150AL Breakout gyro. I have connected to a PIC16F877A microcontroller.The problem is that iam getting outputs of gyro around 1100 -1300 deg/sec when i rotate the axes.I donot know whether these values are correct are not??can anyone help me out..!
    The formula used is:
    X_deg=((V_out-V_reference)*5000/1024)/(sensitivity)
    where v_ref=1.23 as suggested in datasheet.
    THANKS ALOT..!

Customer Reviews

No reviews yet.