Shopping Cart 0 items
log in register
Today's Deals Forum Desktop Site
All Categories
Featured
Brands
Development
Sensors
Tools
Miscellaneous
Components
E-Textiles
Robotics
Wireless & IoT
Audio

Creative Commons images are CC BY 2.0

Favorited Favorite 9
Wish List

Omron Snap Action Switch

Whisker Switches** - **Very sensitive lever switches. Great for detecting objects such as other sumo bots, walls, balls, etc. Simple to wire and attach to external 'bumper' bars.

Omron Snap Action Switch Product Help and Resources

Core Skill: Soldering

This skill defines how difficult the soldering is on a particular product. It might be a couple simple solder joints, or require special reflow tools.

1 Soldering

Skill Level: Noob - Some basic soldering is required, but it is limited to a just a few pins, basic through-hole soldering, and couple (if any) polarized components. A basic soldering iron is all you should need.
See all skill levels

Core Skill: Electrical Prototyping

If it requires power, you need to know how much, what all the pins do, and how to hook it up. You may need to reference datasheets, schematics, and know the ins and outs of electronics.

3 Electrical Prototyping

Skill Level: Competent - You will be required to reference a datasheet or schematic to know how to use a component. Your knowledge of a datasheet will only require basic features like power requirements, pinouts, or communications type. Also, you may need a power supply that?s greater than 12V or more than 1A worth of current.
See all skill levels

Comments

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • nojo / about 13 years ago / 4

    i like these... very clicky

  • wsanders / about 11 years ago * / 1

    I have a ton of these from surplus already. Could someone post a (link to) picture or model of how these are "simple" to attach to a bumper bar type switch? I can't figure out a way, except by attaching a whisker to the blade with globs of epoxy. I'd like to be able to reuse them when my designs gets recycled.

    As an alternative, I've though about surrounding my robot with large domed arcade switches - about the same price and easy to mount with a L-shaped bracket.

    TIA ...

    • JerZ / about 11 years ago * / 1

      I usually use a solderless blade terminal to interface these with a bumper mechanism. You might have to squeeze the end a bit so it fits the switch arm snugly, but they work quite well. Different color connectors are different sizes, so make sure you get the one that fits your switch the best.

  • engineer77 / about 15 years ago / 1

    Hmmm. Seems rather expensive for such a simple switch...

    • SomeGuy123 / about 13 years ago * / 1

      Sensitive switches like these are somewhat expensive to produce due to their complexity.
      Open one up and you'll see what I mean.

      • Sciguy / about 11 years ago / 1

        I popped one open, and it is surprising, there are (at least in a slightly bigger equivalent, though I would assume the smaller ones use basically the same mechanism) 4 separate moving parts and 2 stationary metal contact strips in complex shapes.

  • IllogicGate / about 13 years ago / 0

    Never use one of these as a trigger for an Uzi. xP

Customer Reviews

No reviews yet.